multiparameter water analyzer
multiparameter water analyzer

M510T Portable Multiparameter Water Quality Meter

Portable Multiparameter Water Analyzer pH EC ISE DO Temperature ion meter
Test parameter
Product Details
Portable multiparameter water quality meter

1.Color High contrast LCD touchscreen, 4.3 inches.
2.Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc.
3.Multi-reading feature allows auto-read, timed-read and continuous-read. 
4.Automatic/Manual temperature compensation ensures accurate results.
5.Auto-hold feature senses and locks the measurement endpoint.
6.Data capacity of up to 500 sets for each parameter (GLP-compliant).
7.Data analysis feature helps user review, compare and recalculate results.
8.Support for USB communication.
9.Auto-power off feature effectively extends the battery service life.
10.Reset feature automatically resumes all settings back to factory default options.
11.IP65 waterproof. The portable meter is suitable for fields measurements and out door measurements.

1.E-301-QC 3 in 1 pH composite electrode
2.DJS-1VTC EC electrode
3.DO-958-Q polarographic DO electrode
4.NIST pH standard solution(4.01, 7.00, 10.01) ,50ml/vial
5.1413μS/cm EC standard solution, 50ml, 1 vial
6.Electrode holder
7.Silicone rubber case
9.Carrying Case
10.Touch pen
 pH: 1-8 points calibration with Standard Recognition. Selectable pH buffer groups, including DIN, NIST, USA, MERK, JIS, GB. Support for pH standard group customization. Automatic electrode diagnosis with pH slope and offset display. User-defined pH buffer or buffer group is supported.
DO: Support for air-saturated water or zero oxygen calibration. Auto barometric pressure compensation. Manual Salinity Factor Correction. Selectable pressure unit, including kPa, mbar, Torr, Atm.
Conductivity: 1-5 points calibration automatically recognizes standard recognition. Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor. Temperature compensation type (none, linear, pure water).
Ion: 1-6 points calibration. Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc. Measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode. Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
Model M510T
Parameters pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH Range -2.000 to 20.000 pH
Resolution 0.1, 0.01,0.001 pH
Accuracy ±0.002 pH
Calibration Points Up to 8
Standard Customization Yes
Calibration Reminder Yes
Standard Recognition MERK,JIS, NIST, GB, USA and DIN buffers
Slope Limit Yes
Mv/ORP Range -2000.0 to 2000.0 mV
Resolution 0.1 0.01mV
Accuracy ±0.1 mV or ±0.03%
EH ORP Mode Yes
ORP Calibration Points 1 custom point (relative mV)
pX Range -2.000 to 20.000 pX
Resolution 0.1, 0.01 ,0.001pX
Accuracy ±0.002 pX
Calibration Points Up to 6
ISE Range 1.000e-9 to 9.999e+9
Units mol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppb
Resolution Up to 4 significant digits
Accuracy ±0.3%
Calibration Points Up to 8
Conductivity Range 0.000 μS/cm to 3000 mS/cm
Resolution 0.001 μS/cm minimum,
various with range selection
Accuracy ±0.5% FS
Reference Temperature 5,10,15,18,20, 25 ºC
Calibration Points Up to 5
Calibration reminder Yes
Standard Recognition 10μS/cm, 84μS/cm, 500μS/cm, 1413μS/cm, 12.88mS/cm; 146.5μS/cm, 1408μS/cm, 12.85mS/cm, 111.3mS/cm
Resistivity Range 5.00 Ω·cm~100.00 MΩ·cm
Resolution 0.01Ω ·cm minimum,
Accuracy ±0.5% FS
TDS Range 0.0000 ppm~1000 ppt
Resolution 0.001mg/L minimum, changed with range
Accuracy ±0.5%FS
Salinity Range 0.0~80.0 ppt
Resolution 0.1ppt
Accuracy ±1ppt
Oxygen Concentration
Sensor Type Polarographic
Range 0.00 to 99.99ppm
Resolution 0.01ppm
Accuracy (0.00~50.00)ppm,±0.10ppm
Calibration Points Air-saturated water or zero point
Barometric Compensation Yes
Manual Salinity Factor Correction Yes
Saturation Range (0.0 to 600.0)%
Resolution 0.10%
Accuracy ±2.0%
Temperature Range -10 to 135 ºC, 14.0 to 275 ºF
Unit ºC, ºF
Resolution 0.1
Relative Accuracy ±0.1ºC
Measurement Reading Mode Auto-Read (Fast, Medium, Slow), Timed, Continuous
Reading Prompts Reading, Stable, Locked
Temp. Compensation ATC, MTC
Data management Data Storage 1000 Groups
GLP Features Yes
Inputs pH Electrode BNC(Q9)
DO with Temp. Probe 4-pin aviation connector
Conductivity with Temp. Probe 5-pin aviation connector
Outputs USB PC, printer,USB 2.0 flash memory device
Display options Backlight Yes
Auto Shutdown 300, 600, 1200, 1800, 3600sec., off
IP Rating IP65
Date and Time Yes
General Power Rechargeable Lithium battery, AC Adapter, 100-240V AC input, DC5V output
Dimensions 90 x 255 x 40 mm
Weight 500g (1.1 lb)
Dimensions (Carton) 490×410×220 mm
Weight (Gross) 5.5 kg
Related Products
First tier manufacturer of precise equipment for  Laboratories
Aoda Instrument Equipment is the first tier manufacturer of precise equipment for  Laboratories, Scientific research institutions and colleges, Medical,Environmental protection agencies,Petrochemical industry etc.
Reliabe And Performance
In-Time Manufacturing
Reliabe And Performance
Reliabe And Performance
Reliabe And Performance
Request A Quote
We will contact you as soon as possible .