multiparameter water analyzer
water multiparameter
multiparameter water analyzer
water multiparameter

M500T Touch screen Benchtop Multiparameter water analyzer

Benchtop Multiparameter Water Analyzer pH EC TDS Conductivity DO Temperature ion meter
Test parameter
Product Details
Benchtop Multiparameter Water Analyzer:

1.Color High contrast LCD touchscreen, 7.0 inches.
2.Intelligent operation system provides features including user management, calibration management, method management, data management and etc.
3.Multi-reading feature allows auto-read, timed-read and continuous-read. 
4.Automatic/Manual temperature compensation ensures accurate results.
5.Data Storage 1000 sets for each parameter (GLP-compliant).
6.Data analysis feature helps user review, compare and recalculate results.
7.Support for USB or RS-232 communication.
8.Reset feature automatically resumes all settings back to factory default options.
9.IP54 waterproof.

1.E-301-QC 3 in 1 pH composite electrode
2.DJS-1VTC EC electrode
3.DO-958-Q polarographic DO electrode
4.NIST pH standard solution(4.01, 7.00, 10.01) ,50ml/vial
5.1413μS/cm EC standard solution, 50ml, 1 vial
6.REX-5 electrode stand
7.Touch pen
 pH: 1-6 points calibration with Standard Recognition. Selectable pH buffer groups, including DIN, NIST, USA, MERK, JIS, GB. Support for pH standard group customization. Automatic electrode diagnosis with pH slope and offset display.
DO: Support for air-saturated water or zero oxygen calibration. Auto barometric pressure compensation. Manual Salinity Factor Correction. Selectable pressure unit, including kPa, mbar, Torr, Atm.
Conductivity: 1-5 points calibration with Standard Recognition. Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor. Temperature compensation type (none, linear, pure water).
Ion: 1-6 points calibration. Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc. Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode. Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.
Model M500T
Parameters pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH Range -2.000 to 20.000 pH
Resolution 0.1, 0.01, 0.001pH
Accuracy ±0.002 pH
Calibration Points Up to 6
Standard Customization Yes
Calibration Reminder Yes
Standard Recognition NIST, GB, DIN, USA, MERK, JIS buffers
Slope Limit Yes
mV/ORP Range -2000.00 to 2000.00 mV
Resolution 0.1, 0.01 mV
Accuracy ±0.1 mV or ±0.03% of
reading whichever is greater
EH ORP Mode Yes
ORP Calibration Points 1 custom point (relative mV)
pX Range -2.000 to 20.000 pX
Resolution 0.1, 0.01, 0.001 pX
Accuracy ±0.002 pX
Calibration Points Up to 6
ISE Range 1.000e-9 to 9.999e+9
Units mol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppb
Resolution Up to 4 significant digits
Accuracy ±0.3%
Calibration Points Up to 6
Conductivity Range 0.000 μS/cm to 2000 mS/cm
Resolution 0.001 μS/cm minimum,
various with range selection
Accuracy ±0.5% FS
Reference Temperature 5, 10, 15, 18, 20, 25 ºC
Calibration Points Up to 5
Calibration Reminder Yes
Standard Recognition 10 μS/cm, 84 μS/cm, 500 μS/cm, 1413 μS/cm, 12.88 mS/cm; 146.5μS/cm, 1408μS/cm, 12.85mS/cm, 111.3mS/cm
Resistivity Range 5.00 Ω·cm~100.0 MΩ·cm
Resolution 0.01 Ω·cm minimum
Accuracy ±0.5% FS
TDS Range 0.000~1000 ppt
Resolution 0.001 ppm minimum, changed with range
Accuracy ±0.5% FS
Salinity Type NaCl
Range 0.0~80.0 ppt
Resolution 0.1ppt
Accuracy ±1ppt
Oxygen Concentration - Polarographic
Range 0.00 to 99.99 ppm
Resolution 0.01 ppm
Accuracy ±0.10 ppm
Calibration Reminder Yes
Calibration Points Air-saturated water or zero point
Barometric Compensation Yes
Manual Salinity Factor Correction Yes
% Saturation -
Range  (0.0 to 600)%
Resolution 0.10%
Accuracy ±2.0%
Temperature Range -10 to 135 ºC, 14 to 275 ºF
Unit ºC, ºF
Resolution 0.1
Accuracy ±0.1
Measurement Reading Mode Auto Read (Fast, Medium, Slow), Timed, Continuous
Reading Prompts Reading, Stable, Locked
Temp. Compensation ATC, MTC
Data management Data Storage 1000 Groups
GLP Features Yes
Log Management Yes
Inputs pH Electrode BNC(Q9)
DO with Temp. Probe 4-pin aviation connector
Conductivity with Temp. Probe 5-pin aviation connector
Outputs USB USB 2.0 flash memory device, PC, scanner,
RS 232 printer, auto-sampler
Display options Backlight Yes
Auto Shutdown 1~60 min, off
IP Rating IP54
Date and Time Yes
General Power AC Adapter, 100-240V AC input, DC24V output
Dimensions 220×195×68 mm
Weight 950g (2.09 lb)
Related Products
First tier manufacturer of precise equipment for  Laboratories
Aoda Instrument Equipment is the first tier manufacturer of precise equipment for  Laboratories, Scientific research institutions and colleges, Medical,Environmental protection agencies,Petrochemical industry etc.
Reliabe And Performance
In-Time Manufacturing
Reliabe And Performance
Reliabe And Performance
Reliabe And Performance
Request A Quote
We will contact you as soon as possible .