rotary evaporator condenser
rotary evaporator condenser

5L Electric Rotary Evaporator(Rotary&Lifting Motor)

High speed rotary evaporator is mainly used for enrichment, crystallization, drying, separation, drug, solvent recycling, bio~pharmaceutical industry etc.
5L 
Rotary flask volume
0-120rpm/min
Rotary speed
40W1/12.5
Lifting motor power
Share:
Product Details
High speed rotary evaporators use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case,  after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.
Characteristics
The main bracket is made of stainless steel and aluminum alloy with reasonable structure and materials. Microprocessor-based power switch control.
All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion. Anti-dry function, the heating pot lower than the heating pipe, the machine will automatically power off.
Sealing system adopts imported fluorine rubber and Teflon two-way combination seal, long corrosion-resistant life, to maintain a high degree of vacuum.
Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.
Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery. Vacuum gauges show real-time vacuum, oil-based table with anti-vibration characteristics.
Continuous feeding for customer's convenience, valve type feeding valve socket PTFE tube.
Collecting bottles are equipped with dropping materials to facilitate the collection and discharge of evaporated extracts.
Check valve control, continuous discharge, the machine in working condition, the vacuum switch. Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.
All valves use the latest integrated hand wheel valve, sealing is good, the operation is more simple and convenient.
.LCD full screen display, temperature, speed dual digital display, bath thermostat intelligent control, PT100-type sensor, quickly and accurately transfer temperature.
Brushless DC motor, stable rotation, no spark, slow down by force. The pot is made of high-quality 304 stainless steel, corrosion-resistant and durable. The outer layer of the pot is covered with a silicone layer, which makes it safer to use at high temperature.
Bath electric lift, lift part of the deceleration by force motor, lifting process more stable. .If there is a sudden power failure while the machine is working, the machine will stop heating automatically when the power is turned on again.
Parameter
Model CE-1005
Voltage/Frequency 220V 50Hz/110V 60Hz
Total Power 2100W
Rotary motor power 60W1/5
Lifting motor power 40W1/12.5
Heating power 2000W
Vacuum degree 0.095Mpa
Rotary flask volume 5LΦ230mm/Φ80 flange port
Collecting flask volume 3LΦ195mm/upper Φ50 flange port×Φ35 flange port×2 pcs×lower Φ50 flange port
Rotary speed 0-120rpm/min
Temperature control range Room temperature-180℃
Temperature control accuracy ±1℃
Bath lifting stroke 140mm
Condenser dimension Φ120×600H(mm) side Φ50 flange port×lower Φ50 flange port
Condensing area 0.5 square meter
Gas cylinder Left Φ35 flange port, side Φ50 flange port, rightΦ50 flange port
Material feeding valve Φ35 flange port, glass+PTFE valve, material feeding valve(pagoda joint) with 12mm outer diameter
Releasing valve Φ35 flange port×2, glass+PTFE valve, releasing valve(pagoda joint)with 12mm outer diameter
Material discharging valve Φ50 flange port, side discharging valve (pagoda joint)with 20mm outer diameter, 260mm from the ground
Vacuum nozzle Pagoda joint with 10mm outer diameter
In and out circulating nozzle of condenser coil Pagoda joint with 16mm outer diameter
Bath dimension/weight Φ295×175H(mm) about 12L
Overall dimension(W*D*H) 980×480×1260mm
Net weight 46KG
Packing dimension 800×450×1090mm   wooden package 0.39 stere
Packing weight 68KG
Message
Related Products
rotary evaporator condenser
Rotary flask volume:100L
Rotary speed:0-120rpm/min
Lifting motor power:40W 1/12.5
Lifting stroke:215mm
100L Electric Rotary Evaporator(Rotary&Lifting Motor)
benchtop rotary evaporator
Rotary flask volume:5L
Rotary speed:0-120rpm/min
Lifting motor power:40W1/12.5
Lifting stroke:140mm
5L Electric Rotary Evaporator(Rotary&Lifting Motor)
recirculating chiller for rotary evaporator
Rotary flask volume:50L
Rotary speed:0-120rpm/min
Lifting motor power:40W1/12.5
Lifting stroke:215mm
50L Electric Rotary Evaporator(Rotary&Lifting Motor)
rotary evaporator distillation alcohol
Rotary flask volume:1L
Rotary speed:0-200rpm/min
Lifting motor power:20W
Lifting stroke:120mm
1L LCD Screen Electric Rotary Evaporator(Rotary&Lifting Motor)
rotary film evaporator
Rotary flask volume:10-50L
Rotary speed:0-120rpm/min
Lifting motor power:EX120W-EX180W
 
10-50L Explosion Proof Electric Lifting Rotary Evaporator
rotovap ethanol
Rotary flask volume:1-5L
Rotary speed:0-120rpm/min
Rotary motor power:EX40W
 
1-5L Explosion Proof Manual Lifting Rotary Evaporator
vacuum evaporator price
Rotary flask volume:3L
Rotary speed:0-120rpm/min
Rotary motor power:40W
 
3L Manual Lifting Rotary Evaporator
vacuum pump for rotary evaporator
Rotary flask volume:20L
Rotary speed:0-120rpm/min
Rotary motor power:120W
 
20L Manual Lifting Rotary Evaporator
First tier manufacturer of precise equipment for  Laboratories
Aoda Instrument Equipment is the first tier manufacturer of precise equipment for  Laboratories, Scientific research institutions and colleges, Medical,Environmental protection agencies,Petrochemical industry etc.
Reliabe And Performance
In-Time Manufacturing
Reliabe And Performance
Reliabe And Performance
Reliabe And Performance
Request A Quote
We will contact you as soon as possible .
*