Lifting motor Rotary Evaporator

3L LCD Screen Electric Rotary Evaporator(Rotary&Lifting Motor)

Liting motor Rotary evaporator is mainly used for enrichment, crystallization, drying, separation, drug, solvent recycling, bio~pharmaceutical industry etc.

Rotary flask volume

0-200rpm/min

Rotary speed

20W

Lifting motor power

Product Details Characteristics Parameters Message

Quote Now Send Email

Product Details

Lifting motor Rotary evaporators use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.

The main stent is made of aluminum alloy.

The sealing system uses PTFE + fluororubber compound sealing.

The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation bottle under vacuum status.

Upright double-layer serpentine coil as integrated condenser.

Rotating and heating is controlled by power switch, which is a ON-OFF tilt button.

Large LCD display, which can display temperature and speed at the same time.

Brushless rotating motor, no spark, low noise, stable running.

Electronic stepless speed regulation, fine-adjustment by knob.

The bath is made of aluminum alloy + Teflon composite pot, aluminum alloy heating plate, PT100 sensor.

The main machine is lifted electrically, and the manual switch, a tilt button also can control the up and down of main machine.

Rotating and heating double fuses safety protection.

Tags:

Electric lifting rotary evaporator distillation

Parameters

Model	CE-3000E
Voltage/Frequency	220V 50Hz/110V 60Hz
Total Power	1260W
Rotary motor power	40W
Lifting motor power	20W
Heating power	1200W
Vacuum	0.098Mpa
Rotary flask volume	3LΦ195mm/Φ50 flange port
Collecting flask volume	2LΦ166mm/35# ball mill port
Rotary speed	0-200rpm/min
Temperature control range	Room temperature-99℃
Temperature control accuracy	±1℃
Main machine lifting stroke	120mm
Condenser dimension	Φ100×530H(mm) lower 35# ball mill stopper
Condensing area	0.26m2
Material feeding valve	19#standard plug valve, feeding valve (pagoda joint) with 10mm outer diameter
Vacuum nozzle	Pagoda joint with 10mm outer diameter
In and out circulating nozzle of condenser coil	Pagoda joint with 12mm outer diameter
Bath dimension/weight	Φ255×155H(mm) about 7.9L 5KG
Overall dimension(WDH)	690×490×(810-930)mm
Net weight	21.5KG
Packing dimension	620×620×490mm wooden package 0.19m³
Packing weight	26KG