rotavap pump
rotavap pump

100L Electric Rotary Evaporator(Rotary&Lifting Motor)

Benchtop rotary evaporator is mainly used for enrichment, crystallization, drying, separation, drug, solvent recycling, bio~pharmaceutical industry etc.
Rotary flask volume
Rotary speed
Lifting motor power
Product Details
Benchtop rotary evaporators use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case,  after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.
The main bracket is made of stainless steel and aluminum alloy with reasonable structure and materials. Brushless DC motor, stable rotation, no spark, slow down by force.
All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion. Bath electric lift, lift part of the deceleration by force motor, lifting process more stable.
Sealing system adopts imported fluorine rubber and Teflon two-way combination seal, long corrosion-resistant life, to maintain a high degree of vacuum. Microprocessor-based power switch control.
Vacuum gauges show real-time vacuum, oil-based table with anti-vibration characteristics.
Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery.
Continuous feeding for customer's convenience, valve type feeding valve socket PTFE tube. If there is a sudden power failure while the machine is working, the machine will stop heating automatically when the power is turned on again.
Collecting bottles are equipped with dropping materials to facilitate the collection and discharge of evaporated extracts.
Check valve control, continuous discharge, the machine in working condition, the vacuum switch.
All valves use the latest integrated hand wheel valve, sealing is good, the operation is more simple and convenient. Anti-dry function, the heating pot lower than the heating pipe, the machine will automatically power off.
.LCD full screen display, temperature, speed dual digital display, bath thermostat intelligent control, PT100-type sensor, quickly and accurately transfer temperature.
Bath electric lift, lift part of the deceleration by force motor, lifting process more stable. Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.
The pot is made of high-quality 304 stainless steel, corrosion-resistant and durable. The outer layer of the pot is covered with a silicone layer, which makes it safer to use at high temperature.
Model CE-100
Voltage/Frequency 380V/50HZ  
Total power 15160W
Rotary motor power 120W 1/5
Lifting motor power 40W 1/12.5
Heating power 15000W
Vacuum degree 0.095Mpa
Rotary flask volume 100L,Φ610mm/Φ180  Flange   port
Collecting flask volume 50L,Φ470mm/ upper  with   Φ80 *Φ35 flange port*2*lower with Φ80 flange port
Rotary speed 0-120rpm/min
Temperature.cotrol range room temperature -180℃
Temperature accuracy ±1℃
Bath lifting stroke 215mm
Condenser size The main condensor Φ230*950H(mm)  upper with Φ80 flange port * lower with Φ263   flange port
  The assisted condensor Φ230*530H(mm)    upper with Φ263flange port* lower with    Φ80 flange port*side with Φ100 flange port
Condensation area 2.3(1.5+0.8)㎡
Gas cylinder Left with Φ45 flange,side with  Φ100 flange,right with Φ100 flange
Material feeding valve Φ45 flange,glass+PTFE valve,feeding nozzle (pagoda-shape connectors) outer diameter 16mm
Multi-function port Φ35 flange,glass+PTFE valve, glass nozzle (pagoda-shape connectors)   outer diameter 12mm
Vacuum nozzle Φ80 flange glass exhaustor, suction nozzle (pagoda-shape   connectors), outer diameter 16mm
In and out circulating nozzle of condenser coil Pagoda-shape connectors, outer diameter 16mm
Releasing valve Φ35 flange port*2, glass+PTFE valve, releasing nozzle   (pagoda-shape connectors), outer diameter 12mm
Material discharging valve Φ80 flange port, side discharging nozzle(pagoda-shape   connectors), outer diameter 20mm, 260mm from the ground
Bath dimension/weight Φ700*400H(mm) about 153L
Overall dimensions (W*L*H) 1700*850*2600mm
Net weight 270kg
Packing dimensions 1670*860*1570 ,2.25m³
Packing weight 366kg
Related Products
rotary evaporator condenser
Rotary flask volume:100L
Rotary speed:0-120rpm/min
Lifting motor power:40W 1/12.5
Lifting stroke:215mm
100L Electric Rotary Evaporator(Rotary&Lifting Motor)
benchtop rotary evaporator
Rotary flask volume:5L
Rotary speed:0-120rpm/min
Lifting motor power:40W1/12.5
Lifting stroke:140mm
5L Electric Rotary Evaporator(Rotary&Lifting Motor)
rotovap for sale
Rotary flask volume:1L-100L
Rotary speed:0-120rpm/min
Lifting motor power:30W-6500W
Lifting stroke:215mm
Rotary Evaporator
rotary evaporator distillation alcohol
Rotary flask volume:1L
Rotary speed:0-200rpm/min
Lifting motor power:20W
Lifting stroke:120mm
1L LCD Screen Electric Rotary Evaporator(Rotary&Lifting Motor)
rotary film evaporator
Rotary flask volume:10-50L
Rotary speed:0-120rpm/min
Lifting motor power:EX120W-EX180W
10-50L Explosion Proof Electric Lifting Rotary Evaporator
rotovap ethanol
Rotary flask volume:1-5L
Rotary speed:0-120rpm/min
Rotary motor power:EX40W
1-5L Explosion Proof Manual Lifting Rotary Evaporator
vacuum evaporator price
Rotary flask volume:3L
Rotary speed:0-120rpm/min
Rotary motor power:40W
3L Manual Lifting Rotary Evaporator
vacuum pump for rotary evaporator
Rotary flask volume:20L
Rotary speed:0-120rpm/min
Rotary motor power:120W
20L Manual Lifting Rotary Evaporator
First tier manufacturer of precise equipment for  Laboratories
Aoda Instrument Equipment is the first tier manufacturer of precise equipment for  Laboratories, Scientific research institutions and colleges, Medical,Environmental protection agencies,Petrochemical industry etc.
Reliabe And Performance
In-Time Manufacturing
Reliabe And Performance
Reliabe And Performance
Reliabe And Performance
Request A Quote
We will contact you as soon as possible .