Small Rotary Evaporator

1-2L Electric Rotary Evaporator(Rotary&Lifting Motor,Sliding&Manual Lifting)

Small Rotary evaporator is mainly used for enrichment, crystallization, drying, separation, drug, solvent recycling, bio~pharmaceutical industry etc.

1-2L

Rotary flask volume

0-200rpm/min

Rotary speed

20W

Lifting motor power

Product Details Characteristics Parameter Message

Quote Now Send Email

Product Details

Small Rotary evaporators use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.

The stent is made of cold plate anti-corrosive spray + aluminum alloy material, and the bath is made of 304 stainless steel.

The sealing system uses PTFE + fluororubber compound sealing.

The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation bottle under vacuum status.

Upright double-layer serpentine coil as integrated condenser.

Rotating and heating is controlled by power switch, which is a ON-OFF tilt button.

Electronic stepless speed regulation, fine-adjustment by knob.

Thermostatic bath with temperature digital display function, Cu50 sensor + stainless steel probe at the bottom of the pot.

The main engine is lifted electrically, easily operates by up and down button (also can be lifted by hand wheel).

Rotating and heating double fuses safety protection.

Tags:

Electric lifting rotary evaporator distillation

Parameter

Model	CE-2010
Voltage/Frequency	220V 50Hz/110V 60Hz
Total Power	1360W
Rotary motor power	40W
Lifting motor power	20W
Heating power	1300W
Vacuum	0.098Mpa
Rotary flask volume	Eggplant shape 1LΦ131mm/24# standard port
Collecting flask volume	Spherical shape 1LΦ131mm/35# ball mill port
Rotary speed	0-200rpm/min
Temperature control range	Room temperature-99℃
Temperature control accuracy	±1℃
Main machine lifting stroke	100mm+150mm(Sliding lift + manual lift)
Condenser dimension	Φ80×370H(mm) lower 35# ball mill stopper
Condensing area	0.15m2
Feeding valve	19#standard plug valve, feeding valve (pagoda joint) with 10mm outer diameter
Vacuum nozzle	Glass adapter + plastic transferring pagoda connector with 10mm outer diameter
In and out circulating nozzle of condenser coil	Glass adapter + plastic transferring pagoda connector with 10mm outer diameter
Bath dimension/weight	Φ240×140H(mm) about 6.3L 3KG
Overall dimension(WDH)	570×400×(630-880)mm
Net weight	11.5KG
Packing dimension	730×550×400mm carton package 0.16m³
Packing weight	16KG