blog

How do you measure/calibrate push and pull?

2023-12-20
Share:
Introduction to a push pull gauge.
Digital display push-pull gauge is a small, simple, multi-functional and high-precision thrust and pull test instrument, which is widely used in electronic appliances, construction hardware, light industrial textiles, auto parts, lighters and other ignition devices, fire equipment, pen making Push-pull load, insertion force test, destructive test, etc. in lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. The digital display has high resolution, high sampling speed, and easy to use. 

How to use a pointer push-pull force gauge?
First of all, there are two types of pointer push-pull force gauges: flat plate and cylinder. The two types are different in appearance. The main reason for selection is the measuring range. The range of the push-pull force gauge includes 100g, 150g, 250g, 500g, etc. It should be based on the approximate range of the measurement and do not exceed its range, otherwise the push-pull force gauge may be easily damaged. It is also not advisable to choose it too large, as this will make it difficult to observe the reading and the accuracy will be low.

Secondly, when measuring, you must first observe whether the pointer is at the zero position. If it is not at the zero position, adjust it to the zero position. This point is sometimes easily overlooked. Often, after a measurement, the pointer is not at zero, and the measured values are all wrong.
Third, pay attention to the reading method when measuring. Keep your eyes level with the pointer and do not squint to minimize reading errors. There are two main numerical labels for dynamometers, namely grams and newtons. Be careful not to confuse them.




How to use a digital push-pull force meter?
1. Before use, first check whether the battery voltage is normal. If there is undervoltage, please charge it in time, otherwise the measurement will be biased.
2. Estimate the measurement size and select a dynamometer with an appropriate range. If the measurement exceeds the range, the dynamometer sensor will be damaged.
3. When the measured value is less than 3% of the force measuring range, the accuracy will deviate.
4. When not in use for a long time, the dynamometer should be charged regularly.
5. At the same time, when the weather is humid in summer, attention should be paid to the storage environment of the instrument to avoid corrosion of the instrument.




Contact Us
If you have a question about push pull gauge and laboratory instrument, contact us to find out how Aoda can help.
Related Products
testing bench
Dimensions: 200X150X260mm
Stroke: 25mm
Net weight: 10kg
Button Dedicated Load Machine
Torque meter
Range:1-5000N
N.m:1.0000/0.0001    
Kg.cm:10.210/0.001
 
Digital Display Torque Tester
laser light scattering particle size analysis
Theory: Mie scattering  
Measuring Range: 0.1~1000μm  
Sample Feeding: Wet dispersion  
 
0.1-10000μm Wet Dispersion Laser Particle Size Analyzer
spring testing equipment
Maximum testing load:10N-5000N
Minimum resolution:0.001N-0.1N
Diameter of the platen:34mm-108mm
Digital Display Spring Tension&Compression Testing Machine
tensile strength testing machine
Effective stroke: 50mm.
Rated load: 500N. 
Net weight: 10.6Kg.
Terminal Tensile Tester
push pull meter
Max. load value:20N-500N
Rod journey:10mm
 
Pointer Push Pull Force Gauge
digital tension meter
Range:10-200KN
Load indexing:0.01KN
Value error:± 0.5%
 
Side Pressure Tension Tester
First tier manufacturer of precise equipment for  Laboratories
Aoda Instrument Equipment is the first tier manufacturer of precise equipment for  Laboratories, Scientific research institutions and colleges, Medical,Environmental protection agencies,Petrochemical industry etc.
Reliabe And Performance
In-Time Manufacturing
Reliabe And Performance
Reliabe And Performance
Reliabe And Performance
Request A Quote
We will contact you as soon as possible .
*