blog

Maintenance of electric centrifugal divider.

2023-12-27
Share:
Maintenance of electric centrifugal divider.
The electric centrifugal divider iare widely used in medical, scientific research, biopharmaceutical and other fields, and are common laboratory equipment. In order to ensure the stability and reliability of the sample divider, regular maintenance is essential. Mainly includes cleaning and disinfection, parts inspection and replacement, daily use precautions, etc. Correct maintenance can extend the service life of the machine and ensure its normal operation and sample processing results.
 
Cleaning and Disinfection
Cleaning steps: Disconnect the power supply and remove the centrifuge cup, centrifuge rotor and other removable parts. Then clean the surface of the parts with warm water and neutral detergent. Do not use acidic or alkaline detergents. Dry the parts with a clean cloth and place them in a ventilated and dry place to dry.
 
Disinfection method: For specific samples or experimental requirements, high-temperature and high-pressure disinfection, ultraviolet disinfection or chemical disinfection methods can be used for disinfection. When disinfecting, ensure that the electric centrifugal sampler is dry to avoid damage to electronic and mechanical components.
 
Parts inspection and replacement
Rotor inspection: Check the balance status of the rotor regularly. If any imbalance is found, replace the rotor with a new one in time. In addition, it is necessary to check whether the rotor bearings are operating normally. If abnormal noise or increased friction is found, the bearings should be cleaned or replaced in time.
 
Power supply system: Check whether the power line is damaged or aging, and replace it in time if there is any problem; also check whether the contact between the power plug and the socket is good to prevent unstable current from causing equipment failure.
 
Control panel and display screen: Regularly check the working status of the control panel and display screen. If there are any abnormalities or malfunctions, contact professional maintenance personnel for repair or replacement.
 
Summary
The maintenance of electric centrifugal sample dividers is crucial to extending the life of the equipment and ensuring the accuracy of experiments. Through correct cleaning and disinfection, parts inspection and replacement, daily use precautions and other maintenance methods, we can ensure that the machine operates normally and the sample processing effect is good. Scientific and reasonable maintenance can not only improve laboratory work efficiency, but also reduce the risk of failures and accidents and ensure the safe operation of the laboratory.






Contact Us
If you have a question about electric centrifugal divider and laboratory instrument, contact us to find out how Aoda can help.
Related Products
Seed electric centrifugal divider
Sample size: 200-1500g
Sample separation error:<± 0.5%/kg
LXFY-II Electric Centrifugal Divider
Automatic seed counter
Seed diameter: 1-12mm
Counting error: ± 2 ‰ 
Counting speed: ≥ 1000 grains/3 mins
SLY-C PLUS Automatic Seed Counter
Vacuum Seed Counter
Suction cup configuration: 5
Motor power: 1250W
ZLC-2000 Vacuum Seed Counter
Electric Seed Air Blower
 Maximum wind pressure: 689pa
Motor power: 550W
Timing: 0~9999 mins
CFY-3 Electric Seed Air Blower
Seed cleaness workbench
Magnification: 0~7 times
Table size: 320mm×320mm
TJD-900 Seed Cleaness Workbench
food moisture analyzer
Max weight:120g
Weighting accuracy:0.005g
Testing accuracy: 0.01%
Rapid Moisture Meter
Seed Purity Workbencth
Magnification: 0-10X
Lighting power: 20-30W
TJD-800 Seed Purity Workbencth
paper Moisture Meter
Max weight:120g
Weighting accuracy:1mg
Testing accuracy: 0.01%
Touch Screen Moisture Meter
First tier manufacturer of precise equipment for  Laboratories
Aoda Instrument Equipment is the first tier manufacturer of precise equipment for  Laboratories, Scientific research institutions and colleges, Medical,Environmental protection agencies,Petrochemical industry etc.
Reliabe And Performance
In-Time Manufacturing
Reliabe And Performance
Reliabe And Performance
Reliabe And Performance
Request A Quote
We will contact you as soon as possible .
*