How do you test a button tension?

1. Introduction to button tensile tester:
ABQ button tester can be equipped with NK and HF push-pull force gauges and special fixtures, which are specially used to measure the buckling force of buttons or the destructive force when they are separated from clothing. Testing the fastening strength of buttons, buttons, etc. is a very important standard, especially in the design and manufacturing of baby and children's clothing. The measurement of a certain amount of force used on the button fastening trim needs to be recorded with a force instrument.

2. Purpose of button tensile tester:

The test purpose of the ABQ button tester is to define the responsibilities of garment manufacturers to ensure that buttons, buttons and fasteners can be properly fixed on garments to prevent buttons, etc. from detaching from garments, causing the risk of babies swallowing them. Therefore, all buttons, buttons and fixed decorative parts on garments (which can be placed entirely into a small object measuring device) must be tested by a button tester.

3. Meaning and function for button tensile tester:
1. The test method of this instrument is used to measure the strength of the vertical pull test on buttons and clothing, and the buttons and buttons are not pulled away from the clothing.

2. The sewing specifications of buttons required by this method should be in accordance with the standards set by the button manufacturer.

3. This test method is used to establish correlations in different wearing environments and to compare different button types and brands.

4. This standard may contain hazardous materials, operations and instruments, and the standard does not list all safety issues that may arise during use. It is therefore the responsibility of the user of a standard to establish relevant safety and health rules and to determine appropriate regulations before use.

5. All buttons need to be sewn tightly to the fabric with chain stitch.

6. According to the test requirements, when the largest button size is greater than 6mm or less than/equal to 6mm, the button must be able to withstand a pulling force of 90N and 50N respectively.

Contact Us
If you have a question about button tester and laboratory instrument, contact us to find out how Aoda can help.
Related Products
testing bench
Dimensions: 200X150X260mm
Stroke: 25mm
Net weight: 10kg
Button Dedicated Load Machine
Torque meter
Digital Display Torque Tester
laser light scattering particle size analysis
Theory: Mie scattering  
Measuring Range: 0.1~1000μm  
Sample Feeding: Wet dispersion  
0.1-10000μm Wet Dispersion Laser Particle Size Analyzer
spring testing equipment
Maximum testing load:10N-5000N
Minimum resolution:0.001N-0.1N
Diameter of the platen:34mm-108mm
Digital Display Spring Tension&Compression Testing Machine
tensile strength testing machine
Effective stroke: 50mm.
Rated load: 500N. 
Net weight: 10.6Kg.
Terminal Tensile Tester
push pull meter
Max. load value:20N-500N
Rod journey:10mm
Pointer Push Pull Force Gauge
digital tension meter
Load indexing:0.01KN
Value error:± 0.5%
Side Pressure Tension Tester
First tier manufacturer of precise equipment for  Laboratories
Aoda Instrument Equipment is the first tier manufacturer of precise equipment for  Laboratories, Scientific research institutions and colleges, Medical,Environmental protection agencies,Petrochemical industry etc.
Reliabe And Performance
In-Time Manufacturing
Reliabe And Performance
Reliabe And Performance
Reliabe And Performance
Request A Quote
We will contact you as soon as possible .